Pneumatic components that incorporate a variety of different elements can be very demanding in terms of lubrication.
Klübersynth GEM 4 N, Klübersynth GH 6 and Klübersynth UH1 6 protect machines from wear and scuffing, ensuring improved component reliability.
Tests show that when gearboxes don't run at full capacity, the lubricant has to perform at lower temperatures.
The Klüberbio RM 2 series is designed for the lubrication of propeller bushes and shaft seals in fixed-pitch and controllable-pitch propellers.
To prevent machinery failure resulting from lubricant misapplication, single-point automatic lubricators provide a cost-effective solution.
Klüber Lubrication has introduced Klüberbio BM 32-142, a high-performance environmentally acceptable lubricating grease for marine applications.
Klüberfood NH1 CH 6-120 SUPREME is NSF H1 registered for incidental contact, providing a food-grade solution for chain lubrication at extreme temperatures.
Klüberfood NH1 CH 6-120 SUPREME is an NSF H1-registered lubricant that protects against wear up to 1200 degrees F.
Klüber Lubrication has introduced Klüberfood NH1 4-002 Spray, a water displacement fluid that is available in an aerosol spray for convenient application.
Lubricants offer high thermal resistance and resistance to oxidation, lower change in viscosity at rising or falling temperature and high wear protection.
Consolidate inventory with the wide applicability of Klüberplex BEM 41-141.
A one-size-fits-all approach: a single special grease for all rolling bearings can help achieve maximum yield.
The lube oil used is an important element for the overall design of a gear.
Klϋber Lubrication will feature its industrial lubricants for mining applications on September 26-28 in Las Vegas.
Under difficult operating conditions, the right type of lubricant plays a vital role in terms of operational reliability.
An examination of stick-slip effects and how theories about polymer friction can be used to develop new lubricants.
Klüberquiet BQR 78-102 combines high-temperature performance and ACM elastomer seal compatibility to lower bearing noise.
Klüber Lubrication provides Klüberalfa MR 3, MR 3-500 and MR 3-800 – universal sliding fluids designed for friction points in automobiles.
Textile machines and their components are subject to high stress. These challenging conditions require specific lubricant solutions.
Klϋber Lubrication will highlight Klübersynth 80 KV, a synthetic high-performance gear oil for weaving machines, at Techtextil North America.
Klϋber Lubrication will highlight its multi-purpose, high-temperature grease and NPE-free oils in booth #1807 at Techtextil North America.